Przykład obliczeniowy opisuje obciążenia od ściskania ścian budynków w układzie tandem, zlokalizowanych w poziomie terenu. The buildings are simplified to rectangular objects and scaled down while maintaining the elevation ratios. The pressure distribution on the walls of the model of a medium-high building was conducted by an experiment. The chosen results (pressure coefficient Cp) are compared with the measured values.
Sferyczna membrana balonu jest wypełniona gazem o ciśnieniu atmosferycznym i określonej objętości (wartości te są wykorzystywane tylko do definiowania modelu ES). Determine the overpressure inside the balloon due to the given isotropic membrane prestress. The add-on module RF-FORM-FINDING is used for this purpose. Elastic deformations are neglected both in RF-FORM-FINDING and in the analytical solution; self-weight is also neglected in this example.
Rura o przekroju rurowym jest obciążona ciśnieniem wewnętrznym. This internal pressure causes axial deformation of the pipe (the Bourdon effect). Determine the axial deformation of the pipe endpoint.
Słup składa się z przekroju betonowego (prostokąt 100/200) oraz stalowego (profil I 200). It is subjected to pressure force. Determine the critical load and corresponding load factor. The theoretical solution is based on the buckling of a simple beam. In this case, two regions have to be taken into account due to different moments of inertia and material properties.
Ten przykład jest modyfikacją Przykładu weryfikacyjnego 0061; jedyną różnicą jest to, że materiał, z którego wykonany jest zbiornik, jest nieściśliwy. An open‑ended, thick‑walled vessel is loaded by both inner and outer pressure. While neglecting self‑weight, the radial deflection of the inner and the outer radius is determined.
Dwuwarstwowe, grubościenne naczynie o grubych ścianach jest obciążone ciśnieniem wewnętrznym i zewnętrznym; dlatego nie ma naprężenia osiowego. While neglecting self‑weight, the radial deflection of the inner and outer radius, and the pressure (radial stress) in the middle radius is determined.
Cztery słupy są zamocowane na dole, a od góry połączone sztywnym blokiem. The block is loaded by pressure and modeled by an elastic material with a high modulus of elasticity. The outer columns are modeled by linear elastic material and the inner columns by a stress-strain diagram with decaying dependence. Assuming only the small deformation theory and neglecting the structure's self-weight, determine its maximum deflection.
Określ maksymalne ugięcie wspornika składającego się z dwóch warstw szkła i jednej warstwy folii pomiędzy nimi. The plate is fully fixed at one end and subjected to uniform pressure.
Na obu końcach zamocowany jest trójwymiarowy blok wykonany z materiału sprężysto-plastycznego. The block's middle plane is subjected to a pressure load. The surface plasticity is described according to the Tsai-Wu plasticity theory.
Określ maksymalne ugięcie bloku trójwymiarowego zamocowanego na obu końcach. The block is divided in the middle: the upper half is made of an elastic material and the lower part is made of timber - an elasto-plastic othotropic material with the yield surface described according to the Tsai-Wu plasticity theory. The block's middle plane is subjected to vertical pressure.
Należy określić maksymalne ugięcie czterech słupów zamocowanych u dołu i połączonych sztywnym blokiem u góry. The block is loaded by pressure and modeled by an elastic material with a high modulus of elasticity. The outer columns are modeled as orthotropic elastic material, and the inner columns as orthotropic elastic-plastic material with the same elastic parameters as the outer columns and plasticity properties defined according to the Tsai-Wu plasticity theory.
Na obu końcach zamocowany jest trójwymiarowy blok wykonany z materiału sprężysto-plastycznego, który jest utwardzany. The block's middle plane is subjected to a pressure load. The surface plasticity is described according to the Tsai‑Wu plasticity theory.
Należy określić maksymalne ugięcia bloku, uwzględniając lub pomijając efekt ścinania. The square block of the isotropic material is fully fixed at one end and loaded with uniform vertical pressure.